ProAMP Mini Phono Preamp for Stereo Receivers / Connect Your Stereo Receiver to Turntables , Microphones , or other Audio Devices - Works with Sony STR-DN1040 / STR-DH130 , Yamaha RX-V373 / RX-V377 , Denon AVR-E300 , Onkyo TX-8020 / TX-8050 , Harman Kardon AVR 1700 , and Many More Receivers!
ProAMP Mini Phono Preamp for Stereo Receivers / Connect Your Stereo Receiver to Turntables , Microphones , or other Audio Devices - Works with Sony STR-DN1040 / STR-DH130 , Yamaha RX-V373 / RX-V377 , Denon AVR-E300 , Onkyo TX-8020 / TX-8050 , Harman Kardo by Accessory Genie at movies-out.com. MPN: LYSB00WNLILJ6-ELECTRNCS. Hurry! Limited time offer. Offer valid only while supplies last. Integrate the Old with the New. What Does a Phono Preamp Do? - A phono preamp boosts your turntable's phono audio level up to a more speaker/stereo
Integrate the Old with the New. What Does a Phono Preamp Do? - A phono preamp boosts your turntable's phono audio level up to a more speaker/stereo receiver-friendly line level , giving you better volume and increased sound quality. If you're planning on hooking up your turntable to a computer , stereo receiver , bookshelf speakers , or any other modern audio equipment , you're going to want this preamp to get the high sound quality that you expect from vinyl. Do I Really Need It? - Most likely , you do. The majority of newer stereo receivers and speakers lack a phono input , which would directly connect them to the turntable. You'll need the preamp to connect to the phono output of the turntable and the line input of the receiver/speakers. And even newer turntables that may feature a built-in preamp probably aren't going to give you the highest quality sound that could be achieved from an external preamp. Quick , Easy Setup - You don't need to be a sound engineer or techie to understand this preamp's setup process. It takes only a minute to power up the preamp with it's included 12 Volt DC Adapter. After that , it's just a matter of using RCA cables (NOT INCLUDED) to hook the preamp to both your turntable and your stereo receiver , speakers , or other audio device. Compatible With: - Yamaha RX-V675 , RX-V373 , RX-V375 , RX-V377 , RX-V475 , RX-V575 , RX-V677 , TSR-6750 , R-S201BL - Sony STR-DN1040 , STRDH130 , STRDH-740 , STR-DN840 , STRDN1030 , STRDN1050 - Denon AVR-E200 , AVR-E300 , AVR-X2100W , AVR-S500BT , AVR-S700W - Onkyo TX-SR313 , HT-RC560 , TX-8050 , TX-8020 - Sherwood RX-4109 , RX4208 - Pioneer VS X-523... and Many More Receivers
Features & Highlights
- Compact preamp gives you the ability to connect your stereo receiver to turntables, speakers or other audio devices. Works With Sony STR-DN1040 , Yamaha RX-V373 , Denon AVR-E300 , Onkyo TX-8020 & More
- Preamp converts your turntables phono level sound to line level for better quality audio and volume
- Necessary for connecting turntable to newer speakers and receivers that do not have a phono input
- Easy setup allows you to quickly hook up the preamp to both turntable and audio device so you can be enjoying your vinyl records in no time
- Includes 12 Volt DC Adapter. NOTE: Does not include RCA Cables
|Item Weight:||0.38 pounds|
|Item Size:||1.4 x 2.25 x 2.25 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Accessory Genie, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Douk Audio
mpn: TUBE-01-SILVER, ean: 6245435006454,
Parameters: Dimensions: 98 * 100 * 32 mm (without knobs and terminals) Power supply: DC12V 1A Frequency response: 20Hz (-0.2dB) ~ 20KHz (-0.2dB) SNR: 100dB Input sensitivity: 300mV ~ 2000mV Output: 3000mV THD: 1000mV 0.1% Weight: 350g Packing List:...
mpn: 4330356407, ean: 7717842111568,
Parameters: Power supply: Powered by 12~18VAC ,5.5/2.1 normal interface RIAA freq response: 20hz-20kHz +/- 0.5dB S/N ratio: >85dB THD:Combines superb analog sound quality with excellent technical performance.. Precise equalization to the standard RI...
mpn: GGAAPPA100BKUS-AGBAG, ean: 0637836597918,
Integrate the Old with the New. What Does a Phono Preamp Do? - A phono preamp boosts your speaker's phono audio level up to a more speaker/stereo receiver-friendly line level , giving you better volume and increased sound quality. If you're plannin...
By SMPro Audio
mpn: 166135, ean: 9333421700787,
The XP200 is a portable stand-alone phono preamplifier designed to convert any turntables audio output to a suitable line level signal for recording or playback. With an adjustable preamplifier gain control and perfectly designed RIAA EQ, the XP200 i...
Features: The Preamplifier Board specially implanted electronic filter circuit, equivalent to installed hundreds of thousands of micro-method of filter capacitance, the current sound is not audible. With acrylic shell, has elegant appearance. It incl...
mpn: FX Tube-01, ean: 6959011591851,
NEVER MISS A GOOD STUFF, THIS WILL BE EVERY Audiophile's NECESSITY. Parameters: Power supply: DC12V 1.5A Output Power: 3000MV Frequency Response: 20HZ (-0.2DB) -20KHZ (-0.2DB) SNR: 100DB Input Sensitivity: 300MV-2000MV THD: 1000MV 0.1% Size: 98X100...
Crosley P10 Phono Preamp with standard audio amplifiers, included Outboard power supply...
mpn: 4330356447, ean: 0714424426901,
Specifications: Model: 12AX7B Classifications: Dual Triode Cathode Type: Indirectly Heated Heater Voltage: 6.3V Heater Current: 0.3A Amplification Factor: 100 Anode Voltage: 330V Anode Current: 1.2mA Bias Voltage: -50V Item Size: 5.6 * 2cm / 2.2 * 0....
By Little Bear
mpn: 4330356474, ean: 0799637775619,
TIPS:when you got the package. you need assemble the preamp board into blue box by youself. it's easy. then you can use it. (the list picture is assembled. just for refer.) Assembled finish PCB. both panel not yet. when you get it.you need assemble ...
mpn: 4330355054, ean: 6921279256865,
Note: 1. The preamp cannot be connected to earphone directly. 2. The is preamplifier. It means that it is middle between Audio input device-> (preamplifier)->stereo amplifier->speaker (or headphone).3. Please make sure to connect the power amplifier...