Yeeco 2x50W+100W Channel Digital Power Audio Sereo Amplifier Board, DC 12-24V Car Stereo AMP Module for Audio System DIY Speakers with Volume Knob; Heatsink; 3.5 Audio Input/ DC Connector
Yeeco 2x50W+100W Channel Digital Power Audio Sereo Amplifier Board, DC 12-24V Car Stereo AMP Module for Audio System DIY Speakers with Volume Knob; Heatsink; 3.5 Audio Input/ DC Connector by Yeeco at movies-out.com. MPN: Y1600088. Hurry! Limited time offer. Offer valid only while supplies last. Product information: Power supply: DC 12-24V Output power: 50W*2 100W*1(Subwoofer) Output load: 4-8Ω Respond range: 14-100KHz SNR: 100db Channel
Power supply: DC 12-24V
Output power: 50W*2 100W*1(Subwoofer)
Output load: 4-8Ω
Respond range: 14-100KHz
Channel amount: 3 (left+right+subwoofer)
Switch frequency: 1.2MHz
Size: 100mm*70mm*30mm (length * width * height)
Please note that noise will happen in these situation:
-Power supply is not sufficient or not stable;
-Using switch power supply
-Using transformer as power supply and without shield & isolation; wdo not avoid interference
-Local at the environment with electromagnetic interference
-Audio input has its own problem
-Audio driver setting
-Music Player effects setting
(1)Hardware problem-> The power supply should not be placed too close to the amplifier board in order to avoid electromagnetic interference. It is better to use high quality power supply which offers stable power. If you use power transformer, using an iron sheet to cover the transformer is highly recommended.
(2)Software problem-> When you connect the amplifier to telephone or computer, you can turn off the special effects software or sound card driver effects settings. Using the software after making sure they will not take effect on the sound effect.
Features & Highlights
- DC 12-24V power supply audio amplifier; great for connecting to telephone or computer; DIY speaker; vehicle auto; home theater; music playing on the street/ square/ shopping mall sound amplify
- Two chips - one for the left/ right channel power amplify and the second is in bridge connection with the front NE5532 to drive the subwoofer
- Digital amplify chip, up to 90% efficiency, low idle loss and high heat dissipation; 1.6mm circuit board, smooth surface, heat resistant and tide resistant
- With DC power supply connection port and DC 12-24V wiring terminals (please do not use in the same time); 3.5mm audio input jack; 3-pin audio input jack; Volume/ Subwoofer/ Stereo knob adjustment
- Several symmetrically mounted capacitances, big capacity, great filtering and energy storage function; Inductance coil has inhibition for the AC; European style wiring terminal
|Item Size:||1.18 x 2.76 x 2.76 inches|
|Package Weight:||0.4 pounds|
|Package Size:||4.5 x 2 x 2 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Yeeco, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Dayton Audio
mpn: APA102, ean: 0848791003806,
Connect with the Dayton Audio APA102 amplifier and enjoy the convenience of auto-on and auto-source switching technology that makes playing your favorite music a breeze. Use this affordable, versatile amp when more power is needed in a multi-zone sys...
By RTL-SDR Blog
mpn: ADSB_1, ean: 0651989513496,
This is a high performance filter and LNA combination for 1090 MHz ADS-B reception with 27dB of gain, a noise figure of around 1dB and over 60dB's of out of band attenuation. Designed to be used with bias tee power from our RTL-SDR Blog V3 dongles w...
mpn: K3118, ean: 0651814994421,
The Kinter K3118 Class D digital mini amplifier provides 15 watts of highly efficient, detailed audio with enough power to drive most any set of stereo speakers. At the heart of the Kinter K3118 amplifier is a state-of-the art Texas Instruments (TI) ...
DROK 30W+30W Car Stereo Amplifier Board Parameters: Voltage: DC 9-15V, recommend 12V Output power: Max 2*35W stereo (14.4V 4ohms), can connect 4~8 ohms speakers Input methods: 3.5mm audio input Protective functions: input reverse protection, short-c...
5W*5W Class D Digital Audio Amplifier Board Parameters: Working voltage: DC 5V (please don't use more than 5V, or the IC will be burnt) Output power: 5W 2Ω 5V 3W 4Ω 5V 1.8W 8Ω 5V Input method: single-ended Dimension: 55.12*32.26mm Performa...
mpn: VWV-A2, ean: 6970141853541,
SMSL A2 SMALL DESKTOP DIGITAL AMPLIFIER Designed to power passive speakers that require an amplifier, the SMSL A2 delivers accurate sound reproduction in a compact, affordable package. It uses the TDA7492 core chip to deliver 40 watts per channel, an...
mpn: INSMARsG7PQiAI, ean: 0662578898856,
Package Included: 1x INSMA TDA7492P Audio Receiver Amplifier Board Parameters Amplifier IC: TDA7492P-Stmicroelcctronics Sound Source: DCM8633 Bluetooth 4.0 module Product name: Wireless Bluetooth 4.0 Audio Receiver Digital Amplifier Board. Power Sup...
mpn: PCAU22, ean: 0652780631020,
The Pyle PCAU22 Home Amplifier is perfect for powering any stereo system. Complete with USB port and 2 x 40 watts of power, this simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 ...
mpn: 43217-57839, ean: 0606479978040,
DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 2*50W+100W Note: Aux insert will automatically detect. When aux is inserted, Bluetooth will break, aux priority, audio is input, not mixed. Product de...
mpn: 4330976560, ean: 7717842115221,
Power supply: Power range: 8-25V (compatible with most laptop power supplys) Interface：outer diameter 5MM，inner core 2.1MM We recommend using 17-22V power supply. Power supply voltage: 12V ------- 8 Ohm speaker / 12W (left channel) + 12W (right...